DEVICE_INFO - Device model ID - E1.20 RDM (Remote Device Management) Protocol Forums

ericthegeek · April 8th, 2014

A modular dimmer that accepts 12 dimmer modules, but only has 6 dimmers installed could use the same Model ID for both configurations.

But, I would argue that for fixed dimmers with a different number of channels, you should use a different Model ID for the 6 and 12 channel versions. This is especially true if they have a different Model Description string ("FancyDIM12" vs "FancyDIM6").

For a fixed dimmer, you *could* use the same Model ID with a different number of sub-devices, but I would strongly discourage this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RDM Device Model Index: please send me device model IDs if you have them!	nomis52	RDM Marketplace Discussion	3	April 24th, 2012 03:35 PM
Broadcasting to a device model	sjackman	RDM General Implementation Discussion	3	January 21st, 2008 12:30 PM

April 8th, 2014	#4
ericthegeek Task Group Member Join Date: Aug 2008 Posts: 390	A modular dimmer that accepts 12 dimmer modules, but only has 6 dimmers installed could use the same Model ID for both configurations. But, I would argue that for fixed dimmers with a different number of channels, you should use a different Model ID for the 6 and 12 channel versions. This is especially true if they have a different Model Description string ("FancyDIM12" vs "FancyDIM6"). For a fixed dimmer, you could use the same Model ID with a different number of sub-devices, but I would strongly discourage this.