How should I best implement a dimmer? - E1.20 RDM (Remote Device Management) Protocol Forums

sblair · October 13th, 2009

Bernt,

Wybron is fairly good to work with if you contact them directly. I've done a lot of debugging of the Infogate for them in the past. If you need any help getting in touch with them let me know.

You can of course send your product to them with a check for $250 and they'll test the compliance of it to the standard and get it "IFE Certified"

http://www.fbexcellence.org/

This is why I'm a strong supporter of what we are doing with the ESTA RDM Plugfests and a critic of the "IFE" effort as compliance really only means it works with their product and not correctly to the standard. It's like a Microsoft standard in that regard.

October 13th, 2009	#16
sblair Administrator Join Date: Feb 2006 Posts: 441	Bernt, Wybron is fairly good to work with if you contact them directly. I've done a lot of debugging of the Infogate for them in the past. If you need any help getting in touch with them let me know. You can of course send your product to them with a check for $250 and they'll test the compliance of it to the standard and get it "IFE Certified" http://www.fbexcellence.org/ This is why I'm a strong supporter of what we are doing with the ESTA RDM Plugfests and a critic of the "IFE" effort as compliance really only means it works with their product and not correctly to the standard. It's like a Microsoft standard in that regard. __________________ Scott M. Blair RDM Protocol Forums Admin

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What is the basic requirement to implement RDM?	wcai_cypress	RDM Physical Layer/Hardware Discussion	24	July 8th, 2009 08:26 PM
Simple dimmer error reporting	Milton Davis	RDM General Implementation Discussion	3	November 7th, 2008 11:15 AM