OLA rdm tesr error results - E1.20 RDM (Remote Device Management) Protocol Forums

jmosgm · November 7th, 2013

Hi

We are currently developing and updating our RDM capabilities

and when we are running the OLA over artnet through a Lumenradio CRMX Nova TX2 RDM into our product.

we get some failed tests results.

as follows.

UnMuteDeviceWithData: FAILED
UnMute device info with param data.
DISCOVERY: pid: DISC_UNMUTE (0x0003), sub device: 0, data: 'x'
Request status: Failed to send request
Failed: expected one of:
RDM_TIMEOUT
RDM_PLUGIN_DISCOVERY_NOT_SUPPORTED

now..

our team of three, is currently not able understand and re-configure these errors to succes..

can someone please provide some knowledge and clarify these fails?

Best regards
Jacob Molbech
Sgmlight.com

nomis52 · November 7th, 2013

Hi Jacob ,

Due to limitations with the RDM-over-ArtNet protocol the tests won't work with the ArtNet plugin. You'll need to use one of the supported devices listed at http://www.opendmx.net/index.php/RDM...ported_Devices

I've updated that page to make it clear.

In the future if you have questions on the RDM Responder tests, please email the RDM Testing Group : https://groups.google.com/forum/#!forum/rdm-testing. I don't monitor these forums.

Simon N

November 7th, 2013	#1
jmosgm Junior Member Join Date: Nov 2013 Posts: 1	OLA rdm tesr error results Hi We are currently developing and updating our RDM capabilities and when we are running the OLA over artnet through a Lumenradio CRMX Nova TX2 RDM into our product. we get some failed tests results. as follows. UnMuteDeviceWithData: FAILED UnMute device info with param data. DISCOVERY: pid: DISC_UNMUTE (0x0003), sub device: 0, data: 'x' Request status: Failed to send request Failed: expected one of: RDM_TIMEOUT RDM_PLUGIN_DISCOVERY_NOT_SUPPORTED now.. our team of three, is currently not able understand and re-configure these errors to succes.. can someone please provide some knowledge and clarify these fails? Best regards Jacob Molbech Sgmlight.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Differences in current OLA RDM Responder tests?	Robert040	RDM General Implementation Discussion	0	July 16th, 2013 06:51 AM

November 7th, 2013	#2
nomis52 Task Group Member Join Date: May 2010 Location: San Franciscio Posts: 57	Hi Jacob , Due to limitations with the RDM-over-ArtNet protocol the tests won't work with the ArtNet plugin. You'll need to use one of the supported devices listed at http://www.opendmx.net/index.php/RDM...ported_Devices I've updated that page to make it clear. In the future if you have questions on the RDM Responder tests, please email the RDM Testing Group : https://groups.google.com/forum/#!forum/rdm-testing. I don't monitor these forums. Simon N