Responder Packet Timing issue - E1.20 RDM (Remote Device Management) Protocol Forums

berntd · May 26th, 2015

Hello

We have just ran into a problem with the timinig as follows:

Table 3-3 Resonder Packet Timing
Line 1 Receive: Inter-slot time Max = 2.1ms

Table 3-4
Line 1 Controller request -> responder response Max = 2.0ms

That cannot be met met by any receiver having a timeout of 2.1ms waiting for more bytes.

This has come up because a typical recveiver using DMA, has to use a timeout to consider a packet as completely received.

Regards
Bernt

May 26th, 2015	#1
berntd Senior Member Join Date: Jan 2008 Posts: 102	Responder Packet Timing issue Hello We have just ran into a problem with the timinig as follows: Table 3-3 Resonder Packet Timing Line 1 Receive: Inter-slot time Max = 2.1ms Table 3-4 Line 1 Controller request -> responder response Max = 2.0ms That cannot be met met by any receiver having a timeout of 2.1ms waiting for more bytes. This has come up because a typical recveiver using DMA, has to use a timeout to consider a packet as completely received. Regards Bernt

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Timing contraints driver switch from controller to responder	mkoelman	RDM Timing Discussion	2	March 18th, 2015 02:44 AM
3.2.1 Responder Packet Timings	prwatE120	RDM Timing Discussion	6	May 23rd, 2009 09:32 AM
Packet Captures?	jhuntington	RDM General Implementation Discussion	0	March 4th, 2007 08:19 PM