E1.20 RDM (Remote Device Management) Protocol Forums  

Go Back   E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM General Implementation Discussion

RDM General Implementation Discussion General Discussion and questions relating to implementing RDM in a product.

Thread Tools Search this Thread Display Modes
Old November 20th, 2020   #1
Thierry Dupont
Junior Member
Join Date: Nov 2020
Location: FRANCE
Posts: 6
Send a message via Skype™ to Thierry Dupont
Default Addressing Universes on RDM: Manufacturer PID V ENDPOINT_TO_UNIVERSE

Hello Everyone,

This is my first message, surely not the last one.
At Robert Juliat we are working on a new platform and we have an embedded node that can receive Art-Net and Sacn. Also we have one a classic DMX/RDM port.
We implemented RDM E1.20 + parts of E1.37-1/-2.

We have to address Universes by RDM for Sacn and Art-Net:
- Should we use a MANUFACTURER_PID or ENDPOINT_TO_UNIVERSE 0x0903 from E1.37-?
- For Art-Net could we use 0 to 32767 to address the universe?

Thierry Dupont is offline   Reply With Quote
Old November 20th, 2020   #2
Join Date: Feb 2006
Posts: 436
Send a message via AIM to sblair Send a message via MSN to sblair

Welcome to the forums Thierry.

I would suggest using the ENDPOINT_TO_UNIVERSE PID from E1.37-7. You will also want to support the ENDPOINT_LIST PID as well for controllers that may be expecting that before using the ENDPOINT_TO_UNIVERSE PID.

It's a been a long time since I've cracked open the ArtNet spec but I know the newer versions of it are using sACN underneath so it might work for the later versions of ArtNet.

We specifically didn't address use of ArtNet with any of the PIDs as we limited the scope to focusing on sACN as that is the direction everything has been moving towards.
Scott M. Blair
RDM Protocol Forums Admin
sblair is offline   Reply With Quote


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
PDL size for GET Manufacturer-specific PID sergeychk RDM Interpretation Questions 2 April 16th, 2020 03:35 AM
DMX Addressing when Footprint is Zero Mark_C RDM General Implementation Discussion 8 January 17th, 2010 10:47 AM
Manufacturer Specific Pids berntd RDM General Implementation Discussion 4 November 29th, 2009 02:50 PM
Auto DMX Addressing via RDM ?! chamber RDM General Implementation Discussion 12 November 11th, 2009 12:47 PM
RDM Discovery - Effect of Manufacturer IDs zshenker RDM General Implementation Discussion 4 April 10th, 2009 02:30 PM

All times are GMT -6. The time now is 05:22 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.