Sub-Device Status Threshold - E1.20 RDM (Remote Device Management) Protocol Forums

ericthegeek · August 15th, 2011

The E1.20 document doesn't give much detail on the SUB_DEVICE_STATUS_REPORT_THRESHOLD PID other than that the Status Type argument comes from table A-4.

Of the 8 values in A-4, which are appropriate to use with this PID?

STATUS_NONE
STATUS_GET_LAST_ MESSAGE
STATUS_ADVISORY
STATUS_WARNING
STATUS_ERROR
STATUS_ADVISORY_CLEARED
STATUS_WARNING_CLEARED
STATUS_ERROR_CLEARED

What does each mean? Does setting the threshold to Warning mean the sub-device will report both warning and Errors, or does it only report errors?

I have my own opinion, but I'd like to see how others interpret it.

August 15th, 2011	#1
ericthegeek Task Group Member Join Date: Aug 2008 Posts: 382	Sub-Device Status Threshold The E1.20 document doesn't give much detail on the SUB_DEVICE_STATUS_REPORT_THRESHOLD PID other than that the Status Type argument comes from table A-4. Of the 8 values in A-4, which are appropriate to use with this PID? STATUS_NONE STATUS_GET_LAST_ MESSAGE STATUS_ADVISORY STATUS_WARNING STATUS_ERROR STATUS_ADVISORY_CLEARED STATUS_WARNING_CLEARED STATUS_ERROR_CLEARED What does each mean? Does setting the threshold to Warning mean the sub-device will report both warning and Errors, or does it only report errors? I have my own opinion, but I'd like to see how others interpret it.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode