E1.20 RDM (Remote Device Management) Protocol Forums  

Go Back   E1.20 RDM (Remote Device Management) Protocol Forums > RDM Developer Forums > RDM General Implementation Discussion

RDM General Implementation Discussion General Discussion and questions relating to implementing RDM in a product.

Reply
 
Thread Tools Search this Thread Display Modes
Old November 3rd, 2017   #1
majid
Member
 
Join Date: Oct 2017
Location: Turkiye
Posts: 38
Default 2 sets of personality

hi everyone

I m new to RDM, trying to design RDM-DMX LED fixture.
I have read old posts and found answers for most of my questions.

planning to make LED array fixture with 2 sets of personalities:
1: LED/pixel: {1 LED/pixel, 3/LED/pixel, ...}
2: Color: {RGB(3channel), RG(2ch), R(1ch) , ...}

seems it is not possible to have more than 1 set of personalities.
shall I do it using Manufacture specific PIDs?
or is there better approach ?
majid is offline   Reply With Quote
Old November 3rd, 2017   #2
sblair
Administrator
 
Join Date: Feb 2006
Posts: 438
Send a message via AIM to sblair Send a message via MSN to sblair
Default

Majid, Welcome to the forums!

Yes, there is only 1 set of personalities. I would take caution in how you implement this as having a large number of combinations/personalities will make it much more difficult for you to get support from lighting consoles as they may only choose to implement a couple of the personalities and not all 23 of them... DMX channels are relatively cheap these days so having lots of complex combinations just to save on DMX channels may not be actually saving you that much.
__________________
Scott M. Blair
RDM Protocol Forums Admin
sblair is offline   Reply With Quote
Old November 3rd, 2017   #3
majid
Member
 
Join Date: Oct 2017
Location: Turkiye
Posts: 38
Default

Thank you scott

I m happy joned the forum!

I understand, I have already implemented LED/pixel yet, its amzing for me!
I think its better to avoid Slot/pixel, it seems useless

Thanks
majid is offline   Reply With Quote
Old December 14th, 2017   #4
prwatE120
Task Group Member
 
Join Date: Jun 2006
Posts: 181
Default

Majid

Scott's answer may have been over cautious. There are plenty of fixtures with multiple personalities to allow the user to select the best slot allocation for their application and DMX footprint. That said, I suggest exceeding 15-20 is excessive, and may result in some (poorly implemented IMHO) controlllers not allowing access to all your options.

I would restrict the use of Manufacturer specific PIDs where possible - as many of the current controllers so NOT allow access to them in any form. Again, a controller limitation that will reduce in time. Man Spec PIDS are ideal for things like calibration and current settings that the end user is not normally expected to tamper with.

Since you are developing a responder, I would commend the RDMIntegrity package to you - it is a compregensive toolset for verifying RDM responder implementations.

PM me if you would like more information.

Peter
prwatE120 is offline   Reply With Quote
Old December 16th, 2017   #5
majid
Member
 
Join Date: Oct 2017
Location: Turkiye
Posts: 38
Default

I agree the "keep it simple" principle and try not to mess with special PIDs unless its really needed
For my current project, standard PIDs satisfy requirements,

Actually I need a verification to unveil hidden bugs, faults
Thanks
majid is offline   Reply With Quote
Old August 11th, 2018   #6
ArdenCro
Junior Member
 
Join Date: Aug 2018
Posts: 1
Default

Quote:
Originally Posted by majid View Post
I agree with this excellent Zippyloan review so "keep it simple" principle and try not to mess with special PIDs unless its really needed
For my current project, standard PIDs satisfy requirements,

Actually I need a verification to unveil hidden bugs, faults
Thanks
Would RDMIntegrity package be something you'd expect to beginner users with similar needs as Majid or is there a simpler option but maybe not as powerful?

Last edited by ArdenCro; November 19th, 2022 at 02:17 PM.
ArdenCro is offline   Reply With Quote
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Sub Device and Personality kster RDM Interpretation Questions 1 July 29th, 2009 10:00 AM
DMX Personality p_richart RDM Interpretation Questions 6 November 12th, 2008 10:53 PM
Personality & Subdevices kocurr RDM General Implementation Discussion 1 July 8th, 2008 10:30 PM


All times are GMT -6. The time now is 10:51 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.