Wireshark Arnet/RDM/DMX dissector - E1.20 RDM (Remote Device Management) Protocol Forums

Methi · June 18th, 2012

I'm testing/ using 1.8.0rc1. I think there are some things to do better:

First it doesn't support Artnet III ?
Second thing is on an ArtTodRequest: It doesn't displays the command-byte correct (still there is only one command (0x00) yet) it should be known ans "TodFull" and not "unknown".

I will further use it and report if I find (more) errors;

It's much better then the old version, thanks

Greetings

Methi

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

June 18th, 2012	#1
Methi Junior Member Join Date: May 2011 Posts: 2	I'm testing/ using 1.8.0rc1. I think there are some things to do better: First it doesn't support Artnet III ? Second thing is on an ArtTodRequest: It doesn't displays the command-byte correct (still there is only one command (0x00) yet) it should be known ans "TodFull" and not "unknown". I will further use it and report if I find (more) errors; It's much better then the old version, thanks Greetings Methi