Correctly handling ACK_OVERFLOW - E1.20 RDM (Remote Device Management) Protocol Forums

nomis52 · September 6th, 2010

Quote:

Originally Posted by ericthegeek

Again, a controller should probably handle both, but I'd argue a responder shouldn't generate ACK_OVERFLOWs for STATUS_MESSAGES responses.

Agreed, when's the next revision due out

?

sblair · September 6th, 2010

Quote:

Originally Posted by nomis52

Agreed, when's the next revision due out

?

I'm still working on getting the last rev released!

hamish · January 28th, 2011

It has now become apparent that I will have to implement ACK_TIMER for FW upload over RDM, ug.

This post is just to report a minor documentation detail 6.3.3 Page -28- ACK_TIMER response (PD) = 0x00000258.
This is a 16 bit field...

January 28th, 2011	#3
hamish Member Join Date: Apr 2009 Location: Dartmoor, Devon, England Posts: 56	The time has come. It has now become apparent that I will have to implement ACK_TIMER for FW upload over RDM, ug. This post is just to report a minor documentation detail 6.3.3 Page -28- ACK_TIMER response (PD) = 0x00000258. This is a 16 bit field...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ACK_TIMER Handling	ericthegeek	RDM General Implementation Discussion	8	January 20th, 2011 08:15 PM
Command Class / Parameter ID mismatch handling	dangeross	RDM Interpretation Questions	2	April 16th, 2009 01:39 PM