DMX Addressing when Footprint is Zero - E1.20 RDM (Remote Device Management) Protocol Forums

Mark_C · January 17th, 2010

Thanks guys, this was very helpful. I've done it both ways, so modifying the firmware as you suggest - and using the ACK_OVERFLOW should be no problem.

This is a great forum, and you guys are very helpful for people trying to figure out the nuances. I believe RDM is an invaluable addition to DMX and we're moving full speed to implement it in all our products.

Thanks for your help!

Mark

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Auto DMX Addressing via RDM ?!	chamber	RDM General Implementation Discussion	12	November 11th, 2009 12:47 PM

January 17th, 2010	#8
Mark_C Junior Member Join Date: Dec 2009 Posts: 5	Thanks guys, this was very helpful. I've done it both ways, so modifying the firmware as you suggest - and using the ACK_OVERFLOW should be no problem. This is a great forum, and you guys are very helpful for people trying to figure out the nuances. I believe RDM is an invaluable addition to DMX and we're moving full speed to implement it in all our products. Thanks for your help! Mark